The Crystal 600 Pro is a great balance of convenience, flavour, and performance; however, if you are a new vaper or merely looking to purchase a basic but high-performance device, the Crystal 600 Pro is a great choice. The device is aimed at entry-level and established vapers, who prefer a smaller device replacing the SKE Crystal disposable. This guide will guide you on how to unbox, assemble and have your first puff so that you will start enjoying your newfound vaping life.
The first one is to become acquainted with your SKE Pro 600 vape device. The box will contain all the instructions to get started:
The Crystal 600 Pro is a small and rechargeable device.
Two 20mg nicotine salt e-liquid prefilled pods with 2 ml.
Charging cable in the inbuilt 500 mAh battery.
User instructions for reference.
The Crystal 600 Pro is a device that is made to be simple, unlike the traditional vaping devices. The pods are compatible with the device, which means that you can begin to vape without having to adjust the buttons and settings.
The SKE Crystal Pro Pod is at the centre of the apparatus. All of the pods are filled with premium nicotine salt e-liquid that provides a smooth, easy throat hit and pleasing taste.
The pods have some of the following key features:
Vape-and-go convenience.
Nicotine salt formula – gives one a similar feeling to smoking.
Diversity of flavour – more than 30 different flavours, including fruity, menthol, and dessert flavours.
The pods can also be used with the refillable option, which means you can use your own e-liquid to have a cheaper experience.
Make sure that your SKE Crystal Pro vape device is charged before taking your first puff. The Crystal 600 Pro will have an inbuilt 500 mAh battery, which will support up to 600 puffs.
To charge:
Plug the given USB cable into the gadget.
Insert it into a wall adapter, a laptop or any other USB power source.
Use it when the indicator reaches a full charge.
A powerful battery will ensure that you can maintain the same vapour and can make the most out of the Crystal 600 Pro.
When your device is fully charged, then it is time to install the SKE Crystal Pro 2 ml Pod. It is a simple process:
Take the pod out of its packaging.
Remove the safety seal from the bottom of the pod.
Line up the pod with the slot in the device.
It should be pressed until it clicks in.
The gadget is draw-activated, which means that when one inhales, he/she automatically gets a vapour. It does not require any buttons or manual power adjustments and therefore is very beginner-friendly.
Although the e-liquid is prefilled into the pods, it is better to give it several minutes to settle to get increased flavour and avoid burnt hits.
Steps to prepare:
Place the pod into the device.
The e-liquid should be given time to absorb into the coil, 3-5 minutes.
Gently inhale first to initially begin the flow.
It does this to make your initial puff delicious and enjoyable, and it also prolongs the life of the pod.
Once you have loaded the pod and primed it, you are now ready to vape. All you need to do is to inhale using the mouthpiece with the Crystal 600 Pro.
The advantages of the device consist in:
Draw on-command feature – no buttons, no complex controls.
Nicotine delivery is smooth, which is courtesy of the prefilled pods.
Uninterrupted flavour – every puff is full of flavour, without diminishing.
As much as you might like fruity, menthol or traditional tobacco flavours, the Crystal 600 Pro comes up with the satisfying vaping experience at the initial puff.
A variety of flavours is one of the greatest features of the Crystal 600 Pro. The SKE Crystal Pro 2ml Pod system has more than 30 flavours that would match every palate.
Popular choices include:
Berry Ice
Mango Ice
Strawberry Banana
Fresh Menthol Mojito
Tobacco
Watermelon Strawberry Bubblegum.
Having such a variety, one can either venture into new flavours or just continue with the favourite ones.
The Crystal 600 Pro can use refillable pods, in case you want something cheaper or environmentally friendly. They will enable you to work with your own e-liquids and still have the luxuries of the same convenience and performance offered by prefilled pods.
To refill:
Take the pod out of the device.
Add your desired e-liquid in it.
Inserting and priming take some minutes.
The refillable pods minimise waste and have a greater degree of flavour and nicotine strength.
When you take proper care of your device, it will last longer and keep on performing. Follow these tips:
Change pods as flavour dies or vapour dies.
Wipe off the mouthpiece and pod connection points.
Do not allow the battery to run completely and then recharge it.
Select an appropriate location to keep the device when not in use (store it in a cool and dry place).
Minimal maintenance is very helpful in saving your vaping experience.
Even a stable device such as the Crystal 600 Pro may have some minor problems. Some of the typical problems can be solved in the following ways:
Weak vapour – ensure that the pod is protruding and the battery is charged.
Burnt taste – make sure that you prime and do not take long continuous inhalations.
No firing of the device; be sure that the pod is in position.
These measures will help your device work smoothly and will give you a happy time every time with the puffs.
Crystal 600 Pro will be the new handheld product that will merge convenience, mobility and taste. Key advantages include:
Small and lightweight construction – portable.
User-friendly and draw-activated, making it ideal for beginners.
Flavour mixes – more than 30 different choices.
Extended battery life Up to 600 puffs on a full charge.
Flexible pods – can be configured to suit prefilled and refillable pods.
This renders it perfect for both new vapers and seasoned users of such a device who are in need of something basic and yet high-performing.
The following points should be remembered to safely enjoy the Crystal 600 Pro:
Always use the compatible pods.
Do not fill up refillable pods excessively.
Store the device and pods in the absence of heat and sunlight.
Keep away from children and pets.
Use power sources and charging cables that are provided.
By taking these precautions, one will have a safe and enjoyable time vaping.
For vapers in Birmingham and surrounding areas, Vape Shop Birmingham is the perfect place to pick up your Crystal 600 Pro. We stock a full range of SKE Crystal Pro vape devices, prefilled pods, and refillable options to suit every need.
At Vape Shop Birmingham, we offer fast local delivery, free shipping on orders over £25, and expert advice from our knowledgeable team. Whether you are a first-time vaper or upgrading your kit, we can guide you through the full range of flavours, pods, and accessories.
With our support, you can enjoy the convenience, performance, and flavour of the Crystal 600 Pro with confidence.
Starting with the Crystal 600 Pro is simple and rewarding. From unboxing to taking your first puff, the device provides an effortless, enjoyable vaping experience. Its combination of prefilled pods, long battery life, and wide flavour selection makes it a versatile choice for all vapers.
Whether you stick with prefilled pods or explore refillable options, the Crystal 600 Pro ensures every puff is smooth, satisfying, and convenient. Begin your vaping journey today and discover why this device is becoming a favourite for vapers across the UK.
